Binoculars LD214 10x42
Voltronic
1,404 ₴
1 / 4SKU DAS1470
Numerous technological enhancements implemented by the company in this model bring the Athlon Argos G2 HD 10x50 binoculars extremely close to premium-class optics while maintaining an affordable price.
A high level of protection is ensured by the use of a durable and reliable magnesium housing, sealed to IPX7 waterproof standards, purged with inert argon to prevent internal fogging, and featuring a special XPL Protective Coating hydrophobic lens coating on the objective lenses to prevent minor scratches, moisture, and dirt accumulation on the lenses.
High-resolution image transmission is achieved through the use of extra-low dispersion HD glass in the objectives, advanced Advanced Fully Multi-Coating broadband multi-layer coating on every optical surface, as well as high-reflectivity ESP Dielectric Coating and phase-correcting coatings on prisms made of high-quality BAK4 optical glass.
Convenience of use is enhanced by a modern Top Hinge bridge body layout, a large focus wheel diameter, twist-up eyecups, and objective lens caps secured with tethered straps to the housing to prevent accidental loss. Each pair of Athlon Argos G2 HD 10x50 binoculars features a serial number, ensuring the highest level of quality control.
HD Glass. The objective lenses of these binoculars use extra-low dispersion HD glass, which significantly sets this model apart from binoculars featuring standard achromatic glass objectives. HD glass provides a smaller light spectrum scattering angle, thereby reducing chromatic aberration (color fringing) and achieving sharper, higher-contrast image transmission.
Advanced Fully Multi-Coated. These binoculars feature enhanced fully multi-coated optics, meaning that every surface of the optical system is coated with a broadband multi-layer anti-reflective coating. Such multi-layer coating significantly prevents light reflection across the entire visible spectrum. This achieves greater than 99% light transmission through each optical surface, resulting in high image brightness, natural color rendition, and enhanced twilight observation capabilities.
X
PL Protective Coating. An additional outer protective hydrophobic lens coating applied to the objective lenses that provides extra protection against accidental scratches, dirt accumulation, oils, and water droplets. Thanks to this coating, when using the binoculars in the rain, simply shaking them vigorously is enough to remove all droplets from the objective and continue effective observation.
BAK4. To eliminate significant light loss in the erecting prism system, this model utilizes high-density BAK4 (barium crown) optical glass prisms. This glass features a higher refractive index, minimizing light loss and producing a perfectly round exit pupil with uniformly bright imagery from edge to edge, while avoiding vignetting (visible image darkening caused by light beam clipping at the periphery of the exit pupil).
ESP Dielectric Coating. Modern roof prism binoculars utilizing the Schmidt-Pechan system require a reflective coating on one of the prism surfaces. The high-reflectivity ESP dielectric coating (unlike aluminum or silver coatings) is considered the most efficient, reflecting over 99% of the incident light. Only such a coating can ensure the maximum possible light transmission and image brightness in binoculars. This coating type is relatively expensive and is therefore used exclusively in high-class optics.
Waterproof. Whether you get caught in a heavy downpour or accidentally drop the binoculars into a body of water, the protection level of this model ensures that moisture will not penetrate inside and nothing will happen to the binoculars. After all, these binoculars are hermetically sealed with rubber O-rings and feature an IPX7 moisture ingress protection rating, meaning resistance to water ingress when submerged to a depth of 1 meter for 30 minutes.
Fogproof (Argon Purged). This model is fully protected against internal fogging caused by sudden temperature changes. The interior of the binocular housing is argon-purged, eliminating the presence of oxygen or water vapor inside that could condense on the glass or cause corrosion of metal internal parts. The use of argon is more costly compared to nitrogen purging, but argon is an inert gas that does not react with the environment even at high temperatures, unlike oxygen.
Magnesium Body. A special alloy of magnesium, aluminum, and several other alloying metals provides low weight combined with 40-50% higher strength than traditional aluminum alloys used in optical instrument manufacturing. Binoculars built with a magnesium alloy are not only more reliable and durable, but also feature an exceptional exterior finish due to the precision machining of magnesium housings.
Optical Specifications:
Design Features:
Kit Includes:
Dimensions and Weight:
Warranty Period: Lifetime
Manufacturer: Athlon (USA)
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.