DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN

AGM Multi-Gel Battery LP-MG 12V - 40 Ah Silver

SKU 6900023130019

Description

AGM Multi-Gel Battery

External universal rechargeable battery manufactured using AGM multi-gel technology – a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of universal external AGM (absorbent glass mat) batteries features an absorbent fiberglass pad inside the battery. Batteries of this type cope exceptionally well with increased loads.

The main feature of the SILVER battery is the use of silver alloying technology. The plates located inside the battery are protected against corrosion processes; additionally, the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER rechargeable batteries offer a 15% increase in service life and starting currents compared to standard multi-gel batteries.

Advantages of the Multi-Gel AGM Battery:

  • Charge/discharge cycle life for the AGM (multi-gel) battery is 800* cycles (approximately 6-7 years, depending on operating conditions).
  • The battery can be installed in residential areas. The absence of free liquid electrolyte between the plates and complete housing sealing eliminate acid leakage and guarantee no harmful fumes.
  • During practical use, these batteries demonstrate stable performance under low (-20°C) and high (+50°C) ambient temperatures.
  • In operation, the lead-acid AGM (multi-gel) battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during long-term storage and reliable self-protection against over-discharge and overcharge.

Production Features of Multi-Gel AGM Batteries

Multi-gel batteries are manufactured using advanced AGM technology with thickened plates featuring high anti-corrosion properties.

Porous thin fiberglass insulating pads are placed inside the battery. Separators and electrode plates are tightly pressed against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is dosed so that fine pores are filled with acid, while large pores ensure gas circulation.

The battery design features an improved gas recombination system – oxygen and hydrogen generated as a result of chemical processes do not have time to evaporate outside the sealed housing before condensation occurs.

Application Areas: What is a Multi-Gel AGM Battery Needed For?

The universal external rechargeable battery is used in:

  • Telecommunications and other communication systems, including as an external battery for powering mobile phones, walkie-talkies, etc.
  • Video surveillance, security, fire alarm, and other signaling equipment systems.
  • Uninterruptible power supply systems for server stations.
  • Power sources for medical, laboratory, commercial, and other specialized equipment.
  • Energy storage systems from alternative sources (batteries for solar panels).
  • Emergency or LED lighting fixtures.
  • Uninterruptible power supply units and UPS systems.

Which Batteries Are Suitable for Emergency Lighting Systems in Ukraine, and Which Battery Should Be Purchased for a UPS?

The choice of battery depends on the power consumption of the connected loads, as well as the required backup operating time of the electrical equipment from the battery.

An external AGM (multi-gel) battery for a UPS must have an adequate capacity reserve, a wide operating temperature range, and a long service life.

Before deciding which battery is best to purchase for a UPS, carefully review the parameters of the uninterruptible power supply and determine the required runtime for the electrical equipment.

Multi-gel AGM batteries are in high demand among consumers looking to buy an affordable and universal battery for heating boilers, emergency lighting systems, or autonomous water supply.

Before selecting a battery for solar panels, uninterruptible power supplies, or other purposes, consult a specialist:

How to Avoid Battery Capacity Loss During Frequent Power Outages?

Two Important Care Rules for AGM, GEL, MG Batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (take this into account when calculating battery capacity).
  2. After discharge, the battery must be fully charged at 1/10 of its capacity current for 10 hours.

IMPORTANT! If a group of multiple batteries connected in parallel or series is used, then:

  • all batteries must have identical capacity,
  • be of the same AGM, GEL, or MG type,
  • have identical voltage, identical charge/discharge cycle counts,
  • come from the same batch and the same brand.

Violation of these requirements leads to premature failure of one or more batteries and is not covered by warranty. You can obtain more detailed information from our article.

Specifications

Technical Specifications

Nominal Capacity, Ah
40
Nominal Voltage, V
12
Maximum Charge Current, A
8
Type
AGM multi-gel
Internal Resistance, mΩ
8
Charge Voltage (buffer mode), V
13,5-13,8
Charge Voltage (cyclic mode), V
14,7-15,0
Short Circuit Current, A
1200
Nominal Charge Current, A
4
Starting Current, A
400
Terminal Type
T6 (for M6 bolt)
Number of Cycles
800
Housing Material
plastic
Battery Storage Temperature, °C
-20 ~ +50
Operating Charge Temperature, °C
-20 ~ +50
Operating Discharge Temperature, °C
-40 ~ +50
Length, mm
197
Width, mm
165
Height, mm
170
Height with Terminals, mm
170
Warranty, months
24
Weight, kg
12.5

General Information

Model
AGM Multi-Gel Battery LP-MG 12V - 40 Ah Silver
SKU
6900023130019
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog