DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
AGM LP 12V - 5 Ah Silver Battery1 / 4

AGM LP 12V - 5 Ah Silver Battery

SKU 6900015130010

Description

AGM Lead-Acid Battery

External universal AGM battery – a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of universal external AGM (absorbent glass mat) batteries features an absorbent fiberglass pad inside the battery. AGM batteries handle increased loads exceptionally well.

The primary feature of SILVER batteries is the application of silver alloying technology. The plates inside the battery are protected against corrosion processes, and the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER batteries feature a 15% increased service life and higher starting currents compared to standard lead-acid batteries.

Advantages of AGM Battery:

  • AGM battery charge/discharge cycle life – 500* (approximately 5 years, depending on operating conditions).
  • The battery can be installed in residential areas. The absence of free liquid electrolyte between the plates and complete housing sealing eliminate acid leaks and guarantee no harmful emissions.
  • In practical use, these batteries demonstrate stable results when operating under low (-20°C) and high (+50°C) ambient temperatures.
  • During operation, the AGM lead-acid battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during long-term storage and reliable self-protection against overdischarge and overcharging.

AGM Battery Manufacturing Features

Inside an AGM battery, porous insulating pads of thin fiberglass are placed. The separators and electrode plates are tightly pressed against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is metered so that fine pores are filled with acid, while large pores provide gas circulation.

The battery design features an improved gas recombination system – oxygen and hydrogen generated as a result of chemical processes do not manage to evaporate outside the sealed casing before condensing.

Applications: Why is an AGM Lead-Acid Battery Needed?

The universal external rechargeable battery is used:

  • In telecommunications and other communication systems, including as an external battery for charging mobile phones, walkie-talkies, etc.
  • For video surveillance, security, fire alarm, and other alarm systems.
  • In uninterrupted power supply systems for server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (solar panel batteries).
  • As a battery for emergency or LED lighting fixtures.
  • As batteries for uninterruptible power supply units and UPS.

Which batteries are suitable for emergency lighting systems in Ukraine, and which battery should be purchased for a UPS?

Battery selection depends on the power rating of the consumers to be connected, as well as your required backup runtime for the electrical equipment powered by the battery.

The external AGM battery for a UPS must have sufficient capacity margin, a wide operating temperature range, and a long service life.

Before deciding which battery is best to buy for a UPS, carefully review the parameters of the uninterruptible power supply and determine the required runtime for the electrical equipment.

AGM batteries are in high demand among consumers looking for an affordable, universal battery for heating boilers, emergency lighting systems, or autonomous water supply.

How to Avoid Battery Capacity Loss During Frequent Power Outages?

Two important rules for maintaining AGM, GEL, and MG batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (keep this in mind when calculating battery capacity).
  2. After discharge, the battery must be fully charged with a current of 1/10 of its capacity for 10 hours.

IMPORTANT! If using a group of multiple batteries connected in parallel or series:

  • all batteries must have identical capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage and the same number of charge/discharge cycles,
  • be from the same batch and the same brand.

Violation of these requirements leads to premature failure of one or more batteries and is not covered by warranty. You can get more details from our article.

Specifications

Technical Specifications

Nominal capacity, Ah
5
Nominal voltage, V
12
Maximum charge current, A
1
Type
AGM lead-acid
Internal resistance, mOm
35
Charge voltage (buffer mode), V
13.5-13.8
Charge voltage (cyclic mode), V
14.5-14.9
Short-circuit current, A
225
Nominal charge current, A
0.5
Starting current, A
75
Terminal type
T1
Number of cycles
500
Casing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-20 ~ +50
Operating discharge temperature, °C
-20 ~ +50
Length, mm
90
Width, mm
70
Height, mm
103
Height with terminals, mm
107
Warranty, months
12
Weight, kg
1.5

General Information

Model
AGM LP 12V - 5 Ah Silver Battery
SKU
6900015130010
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog