DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN

AGM LP 12V - 1.3 Ah Silver Battery

SKU 6900026740017

Description

AGM Lead-Acid Battery

An external universal SLA battery manufactured using AGM technology—a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of universal external AGM (absorbent glass mat) batteries features an absorbent fiberglass pad inside the battery. Batteries of this type handle increased loads exceptionally well.

The main feature of the SILVER battery series is the application of silver-alloy technology. The plates located inside the battery are protected against corrosion processes; furthermore, the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER batteries feature an extended battery lifespan and a 15% increase in cold cranking amps compared to standard lead-acid batteries.

Advantages of AGM Batteries:

  • Charge/discharge cycle lifespan for an AGM battery is 500* cycles (approximately 5 years, depending on operating conditions).
  • The battery can be installed in residential premises. The absence of free liquid electrolyte between the plates and complete housing sealing eliminate acid leakage and guarantee no harmful fumes.
  • During practical use, these batteries demonstrate stable performance under low (-20°C) and high (+50°C) ambient temperatures.
  • In operation, the AGM lead-acid battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during prolonged storage and reliable self-protection against overdischarge and battery overcharging.

AGM Battery Manufacturing Features

Inside an AGM-technology battery, porous insulating pads made of fine fiberglass are placed. Separators and electrode plates are tightly pressed against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is dosed so that the small pores are filled with acid, while the large ones ensure gas circulation.

The battery design features an improved gas recombination system—oxygen and hydrogen generated as a result of chemical processes do not have time to evaporate outside the sealed casing before condensation occurs.

Applications: What is an AGM Lead-Acid Battery Used For?

The universal external rechargeable battery is used:

  • In telecommunications and other communication systems, including as an external battery for charging mobile phones, walkie-talkies, etc.
  • For video surveillance, security, intruder alarm, fire alarm, and other signaling equipment systems.
  • In uninterruptible power supply systems for server stations.
  • As a power source for medical, laboratory, retail, and other specialized equipment.
  • In energy storage systems from alternative sources (batteries for solar panels).
  • As a battery for emergency or LED luminaires.
  • As batteries for uninterruptible power supply units and UPS.

Which Batteries are Suitable for Emergency Lighting Systems in Ukraine, and Which Battery to Buy for a UPS?

Battery selection depends on the power rating of the loads to be connected, as well as the required backup runtime of electrical equipment powered by the battery.

An external AGM battery for a UPS must have sufficient capacity reserve, a wide operating temperature range, and a long service life.

Before deciding which battery is best to buy for a UPS, carefully review the parameters of the uninterruptible power supply and determine the amount of runtime required for your electrical equipment.

AGM batteries are in high demand among consumers looking to buy an affordable and universal battery for a heating boiler, emergency lighting systems, or autonomous water supply systems.

How to Avoid Capacity Loss in Storage Batteries During Frequent Power Outages?

Two Important Maintenance Rules for AGM, GEL, and MG Batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (keep this in mind when calculating battery capacity).
  2. After discharge, the battery must be fully charged at 1/10 of its capacity current for 10 hours.

IMPORTANT! If a group of multiple batteries connected in parallel or series is used:

  • all batteries must have identical capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage, identical charge/discharge cycle counts,
  • and come from the same batch and brand.

Violation of these requirements leads to premature failure of one or more batteries and is not covered by warranty. More detailed information can be found in our article.

Specifications

Technical Specifications

Nominal capacity, Ah
1,3
Nominal voltage, V
12
Maximum charging current, A
0,26
Type
AGM lead-acid
Internal resistance, mOm
43
Charging voltage (standby mode), V
13,5-13,8
Charging voltage (cyclic mode), V
14,5-14,9
Short-circuit current, A
58,5
Nominal charging current, A
0,13
Cranking current, A
19,5
Terminal type
T1
Number of cycles
500
Casing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charging temperature, °C
-20 ~ +50
Operating discharging temperature, °C
-20 ~ +50
Length, mm
97
Width, mm
43
Height, mm
51
Height with terminals, mm
55
Warranty, months
12
Weight, kg
0.52

General Information

Model
AGM LP 12V - 1.3 Ah Silver Battery
SKU
6900026740017
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog