DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN

AGM Battery LP 6V - 2.8 Ah Silver

SKU 6900072420017

Description

AGM Lead-Acid Battery

External universal SLA battery manufactured using AGM technology – a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of universal external AGM (absorbent glass mat) batteries involves an absorbent fiberglass pad inside the battery. Batteries of this type cope exceptionally well with increased loads.

The main feature of the SILVER SLA is the application of silver alloying technology. The plates located inside the battery are protected against corrosion processes, and furthermore, the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER rechargeable batteries, compared to conventional lead-acid batteries, feature an increased service life and 15% higher cranking current capacity.

Advantages of the AGM Battery:

  • Charge/discharge cycle lifespan of the AGM battery is 500* (approximately 5 years, depending on operating conditions).
  • The battery can be installed in residential premises. The absence of free liquid electrolyte between the plates and complete housing sealing eliminate acid leakage and guarantee the absence of harmful vapors.
  • During practical use, these batteries demonstrate stable results when operating under low (-20°C) and high (+50°C) ambient temperature conditions.
  • In operation, the AGM lead-acid battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during prolonged storage and reliable self-protection against overdischarge and overcharging.

AGM Battery Manufacturing Features

Inside the rechargeable battery manufactured using AGM technology, porous insulating pads of fine fiberglass are placed. The separators and electrode plates are pressed tightly against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The quantity of liquid electrolyte is dosed such that the fine pores are filled with acid, while the large pores ensure gas circulation.

Applications: What is an AGM Lead-Acid Battery Used For?

The universal external rechargeable battery is used:

  • In telecommunications and other communication systems, including as an external SLA for charging mobile phones, walkie-talkies, etc.
  • For video surveillance, security, burglar, fire, and other alarm equipment.
  • In uninterrupted power supply systems for server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (solar battery batteries).
  • As a battery for emergency or LED luminaires.
  • As batteries for uninterruptible power supply units and UPS.

Which SLAs are Suitable for Emergency Lighting Systems in Ukraine, and Which Battery to Buy for a UPS?

The choice of battery depends on the power of the consumers to be connected, as well as the required backup operating time of the electrical equipment from the SLA.

The external AGM battery for a UPS must have a sufficient capacity margin, a wide operating temperature range, and a long service life.

Before deciding which battery is best to buy for a UPS, carefully study the parameters of the uninterruptible power supply and determine the amount of time required for the autonomous operation of the electrical equipment.

AGM batteries are in high demand among consumers who want to buy an inexpensive and universal battery for a heating boiler, emergency lighting systems, or autonomous water supply.

Before choosing a battery for solar panels, uninterruptible power supplies, or other purposes, consult a specialist:

How to Avoid Battery Capacity Loss During Frequent Power Outages?

Two Important Rules for Maintaining AGM, GEL, MG Batteries:

  1. Do not frequently discharge the SLA by more than 30% of its capacity (keep this in mind when calculating battery capacity).
  2. After discharge, the battery must be fully charged with a current equal to 1/10 of its capacity for 10 hours.

IMPORTANT! If a group of multiple batteries connected in parallel or series is used, then:

  • all batteries must have identical capacity,
  • be of the same type (AGM, GEL, or MG),
  • have identical voltage, an identical number of charge/discharge cycles,
  • be from the same batch of the same trademark.

Violation of these requirements leads to the premature failure of one or more SLAs and is not a warranty case. You can obtain more detailed information from our article.

Specifications

Technical Specifications

Nominal capacity, Ah
2.8
Nominal voltage, V
6
Maximum charge current, A
0.56
Type
AGM lead-acid
Internal resistance, mOm
25
Charge voltage (buffer mode), V
6.75-6.9
Charge voltage (cyclic mode), V
7.35-7.5
Short-circuit current, A
126
Nominal charge current, A
0.28
Cranking current, A
42
Terminal type
T1
Number of cycles
500
Enclosure material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-20 ~ +50
Operating discharge temperature, °C
-20 ~ +50
Length, mm
66
Width, mm
34
Height, mm
96
Height with terminals, mm
101
Warranty, months
12
Weight, kg
0.53

General Information

Model
AGM Battery LP 6V - 2.8 Ah Silver
SKU
6900072420017
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog