DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
AGM Battery LP 6V - 12 Ah Silver1 / 4

AGM Battery LP 6V - 12 Ah Silver

SKU 6900025720010

Description

AGM Lead-Acid Battery

External universal battery manufactured using AGM technology – a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of AGM (absorbent glass mat) universal external batteries involves an absorbent fiberglass pad inside the battery. Batteries of this type cope excellently with increased loads.

The main feature of the SILVER battery is the use of silver alloying technology. The plates located inside the battery are protected against corrosion processes, and the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER rechargeable batteries have an extended service life and 15% higher starting currents compared to conventional lead-acid batteries.

Advantages of the AGM Battery:

  • Charge/discharge cycle life in an AGM battery is 500* (approximately 5 years, depending on operating conditions).
  • The battery can be installed in residential premises. The absence of free liquid electrolyte between the plates and complete housing sealing eliminate acid leakage and guarantee no harmful fumes.
  • In practical use, these batteries show stable performance when operating under low (-20°C) and high (+50°C) ambient temperature conditions.
  • During operation, the AGM lead-acid battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type have low self-discharge rates during long-term storage and reliable self-protection against overdischarge and battery overcharge.

Features of AGM Battery Production

Porous insulating pads made of fine fiberglass are placed inside a battery manufactured using AGM technology. The separators and electrode plates are pressed tightly against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is dosed so that small pores are filled with acid, while large pores ensure gas circulation.

The battery design features an improved gas recombination system – oxygen and hydrogen generated as a result of chemical processes do not manage to evaporate beyond the sealed housing before condensation.

Application Areas: What is an AGM Lead-Acid Battery Needed For?

The universal external rechargeable battery is used:

  • In telecommunications and other communication systems, including as an external battery for charging mobile phones, walkie-talkies, etc.
  • For equipping video surveillance, security, alarm, fire, and other signaling systems.
  • In uninterruptible power supply systems for server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (batteries for solar panels).
  • As a battery for emergency or LED luminaires.
  • As batteries for uninterruptible power supply units and UPS.

Which batteries are suitable for emergency lighting systems in Ukraine, and which battery should be purchased for a UPS?

Battery selection depends on the power of the loads to be connected, as well as the required backup operating time of the electrical equipment from the battery.

The external AGM battery for a UPS must have a sufficient capacity reserve, a wide operating temperature range, and a long service life.

Before deciding which battery is best to buy for a UPS, carefully study the parameters of the uninterruptible power supply and determine the amount of time required for autonomous operation of the electrical equipment.

AGM batteries are in high demand among consumers who want to buy an inexpensive and universal battery for a heating boiler, emergency lighting systems, or autonomous water supply.

How to Avoid Battery Capacity Loss During Frequent Power Outages?

Two important rules for maintaining AGM, GEL, MG batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (keep this in mind when calculating battery capacity)
  2. After discharge, the battery must be fully charged with a current of 1/10 of the capacity for 10 hours

IMPORTANT! If a group of several batteries connected in parallel or series is used, then:

  • all batteries must have the same capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage, the same number of charge/discharge cycles,
  • be from the same batch and the same brand.

Violation of these requirements leads to premature failure of one or more batteries and is not a warranty case. You can get more detailed information from our article.

Specifications

Technical Specifications

Rated capacity, Ah
12
Nominal voltage, V
6
Maximum charge current, A
2.4
Type
AGM lead-acid
Internal resistance, mOm
11
Charge voltage (buffer mode), V
6.75-6.9
Charge voltage (cyclic mode), V
7.35-7.5
Short-circuit current, A
540
Rated charge current, A
1.2
Starting current, A
180
Terminal type
T2
Number of cycles
500
Housing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-20 ~ +50
Operating discharge temperature, °C
-20 ~ +50
Length, mm
151
Width, mm
50
Height, mm
96
Height with terminals, mm
100
Warranty, months
12
Weight, kg
1.6

General Information

Model
AGM Battery LP 6V - 12 Ah Silver
SKU
6900025720010
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog