DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN

AGM Battery LP 12V - 18 Ah Silver

SKU 6900064850013

Description

AGM Lead-Acid Battery

External universal VRLA battery manufactured using AGM technology – a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of universal external AGM (absorbent glass mat) batteries involves an absorbent fiberglass pad inside the battery. Batteries of this type cope exceptionally well with increased loads.

The main feature of SILVER batteries is the use of silver alloying technology. The plates located inside the battery are protected against corrosion processes; additionally, the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER batteries, compared to conventional lead-acid batteries, have an increased service life and 15% higher cranking current capacity.

Advantages of AGM Battery:

  • Charge/discharge cycle life in an AGM battery is 400* (approx. 5 years, depending on operating conditions).
  • The battery can be installed in residential areas. The absence of free liquid electrolyte between the plates and complete housing tightness eliminate acid leakage and guarantee no harmful fumes.
  • During practical use, these batteries show stable performance when operating under low (-20°C) and high (+50°C) ambient temperatures.
  • In operation, the AGM lead-acid battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during long-term storage and reliable self-protection against overdischarge and overcharging.

AGM Battery Manufacturing Features

Inside the battery manufactured using AGM technology, porous insulating pads of fine fiberglass are placed. The separators and electrode plates are pressed tightly against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is metered so that small pores are filled with acid, while large ones ensure gas circulation.

The battery design features an improved gas recombination system – oxygen and hydrogen generated as a result of chemical processes do not manage to evaporate beyond the sealed housing before condensing.

Application Areas: Why is an AGM Lead-Acid Battery Needed?

The universal external rechargeable battery is used:

  • In telecommunications and other communication systems, including as an external battery for charging mobile phones, walkie-talkies, etc.
  • For video surveillance, security, fire alarm, and other signaling equipment.
  • In uninterruptible power supply systems for server stations.
  • As a power source for medical, laboratory, retail, and other specialized equipment.
  • In energy storage systems from alternative sources (batteries for solar panels).
  • As a battery for emergency or LED lighting fixtures.
  • As batteries for uninterruptible power supplies and UPS units.

Which Batteries are Suitable for Emergency Lighting Systems in Ukraine, and Which Battery to Buy for a UPS?

The choice of battery depends on the power of the consumers to be connected, as well as the required backup operating time of the electrical equipment from the battery.

The external AGM battery for a UPS must have a sufficient reserve capacity, a wide operating temperature range, and a long service life.

Before deciding which battery is best to buy for a UPS, carefully review the parameters of the uninterruptible power supply and determine the amount of time required for autonomous operation of the electrical equipment.

AGM batteries are in high demand among consumers who want to buy an inexpensive and universal battery for a heating boiler, emergency lighting systems, or autonomous water supply.

How to Avoid Battery Capacity Loss During Frequent Power Outages?

Two Important Rules for Maintaining AGM, GEL, MG Batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (take this into account when calculating battery capacity).
  2. After discharge, the battery must be fully charged with a current of 1/10 of its capacity for 10 hours.

IMPORTANT! If a group of several batteries connected in parallel or series is used, then:

  • all batteries must have the same capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage, the same number of charge/discharge cycles,
  • come from the same batch of the same trademark.

Violation of these requirements causes premature failure of one or more batteries and is not covered by warranty. You can get more detailed information from our article.

Specifications

Technical Specifications

Nominal capacity, Ah
18
Nominal voltage, V
12
Maximum charge current, A
3,6
Type
AGM lead-acid
Internal resistance, mOm
8,5
Charge voltage (buffer mode), V
13,5-13,8
Charge voltage (cyclic mode), V
14,5-14,9
Short-circuit current, A
660
Nominal charge current, A
1,8
Cranking current, A
220
Terminal type
T2
Cycle count
400
Housing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-20 ~ +50
Operating discharge temperature, °C
-20 ~ +50
Length, mm
180
Width, mm
75
Height, mm
166
Height with terminals, mm
166
Warranty, months
12
Weight, kg
5.2

General Information

Model
AGM Battery LP 12V - 18 Ah Silver
SKU
6900064850013
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog