DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN

AGM Battery LP 12V - 100 Ah Silver

SKU 6900042400018

Description

AGM Lead-Acid Battery

External universal rechargeable battery manufactured using AGM technology – a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of universal AGM (absorbent glass mat) external batteries involves the presence of an absorbent fiberglass pad inside the battery. Batteries of this type cope excellently with increased loads.

The main feature of the SILVER battery is the application of silver alloying technology. The plates located inside the battery are protected against corrosion processes; furthermore, the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER rechargeable batteries, compared to conventional lead-acid batteries, feature an increased battery service life and 15% higher cranking currents.

Advantages of the AGM Battery:

  • Charge/discharge cycle resource of the AGM battery is 500* (approximately 5 years, depending on operating conditions).
  • The battery can be installed in residential premises. The absence of free liquid electrolyte between the plates and complete housing tightness eliminate acid leaks and guarantee no harmful fumes.
  • During practical use, these batteries show stable performance under low (-20°C) and high (+50°C) ambient temperature conditions.
  • In operation, the AGM lead-acid battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during long-term storage and reliable self-protection against overdischarge and battery overcharging.

AGM Battery Manufacturing Features

Porous insulating pads made of fine fiberglass are placed inside a battery manufactured using AGM technology. The separators and electrode plates are tightly pressed against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is metered so that fine pores are filled with acid, while large pores ensure gas circulation.

The battery design features an improved gas recombination system - oxygen and hydrogen generated as a result of chemical processes do not have time to evaporate outside the sealed casing before condensation occurs.

Application Areas: What is an AGM Lead-Acid Battery Needed For?

The universal external charging battery is used:

  • In telecommunications and other communication systems, including as an external battery for charging mobile phones, walkie-talkies, etc.
  • For equipping video surveillance, security, burglar, fire, and other alarm systems.
  • In uninterruptible power supply systems for server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (batteries for solar panels).
  • As a battery for emergency or LED luminaires.
  • As batteries for uninterruptible power supply units and UPSs.

Which Batteries Are Suitable for Emergency Lighting Systems in Ukraine, and Which Battery Should Be Purchased for a UPS?

The choice of battery depends on the power consumption of the devices to be connected, as well as the required backup operating time of the electrical equipment from the battery.

The external AGM battery for a UPS must have a sufficient reserve capacity, a wide operating temperature range, and a long service life.

Before deciding which battery is best to buy for a UPS, carefully study the parameters of the uninterruptible power source and determine the amount of time required for the autonomous operation of the electrical equipment.

AGM batteries are in high demand among consumers who want to buy an inexpensive and universal battery for a heating boiler, emergency lighting systems, or autonomous water supply.

How to Avoid Capacity Loss of a Rechargeable Battery During Frequent Power Outages?

Two Important Rules for Maintaining AGM, GEL, and MG Batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (take this into account when calculating battery capacity).
  2. After discharge, the battery must be fully charged with a current equal to 1/10 of its capacity for 10 hours.

IMPORTANT! If a group of multiple batteries connected in parallel or series is used, then:

  • all batteries must have the same capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage, the same number of charge/discharge cycles,
  • and be from the same batch of the same trademark.

Violation of these requirements causes premature failure of one or more batteries and is not a warranty case. You can obtain more detailed information from our article.

On the official LogicPower website, you can order rechargeable batteries for UPSs and other battery types with delivery across Ukraine. Price – directly from the manufacturer.

Warranty – 12 months.

The company ensures 100% fulfillment of warranty obligations. Maintenance and repair of LogicPower equipment is carried out in certified service centers.

*Depending on operating conditions

Specifications

Technical Specifications

Nominal capacity, Ah
100
Nominal voltage, V
12
Maximum charge current, A
20
Type
AGM lead-acid
Internal resistance, mOm
less than 4
Charge voltage (buffer mode), V
13.5-13.8
Charge voltage (cyclic mode), V
14.5-14.9
Short-circuit current, A
2400
Nominal charge current, A
10
Cranking current, A
800
Terminal type
T11 (for M8 bolt)
Number of cycles
500
Housing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-20 ~ +50
Operating discharge temperature, °C
-40 ~ +50
Length, mm
330
Width, mm
171
Height, mm
214
Height with terminals, mm
220
Warranty, months
12
Weight, kg
30

General Information

Model
AGM Battery LP 12V - 100 Ah Silver
SKU
6900042400018
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog