Visual Fault Locator 30mW
Voltronic
920 ₴
1 / 2SKU HBV-200
Battery tester for 6V and 12V up to 200A (Load Fork)
The battery tester allows you to check the charge status of various types of AGM, GEL, and automotive batteries. It is also possible to check battery performance under load. The tester does not require an external power source, making it exceptionally mobile.
Measuring Voltage: 6 and 12V
Measurement Type: Analog
Maximum Current: Not more than 200A
Enclosure Type: Metal
Color: Red
Battery Testing
Before starting work, check if the pointer shows "0" on the scale. If not, use the adjustment knob below the scale to calibrate the reading.
Connect the tester clamps to the battery terminals, making sure that the tester clamp marked in red is connected to the battery terminal marked "+" and that the tester clamp marked in black is connected to the battery terminal marked "-".
Check the position of the pointer indicating the current battery voltage.
If the pointer is in the green zone, it means the battery voltage is normal. The yellow zone indicates a partially discharged battery, which should be charged before performing a load test. The red zone indicates an excessively discharged or damaged battery. If the battery is damaged, it must be replaced with a new one.
Battery Testing Under Load
Caution: During the first load test, a small amount of vapor may come out of the tester's ventilation holes. This is normal and is caused by the evaporation of the factory anti-corrosion load coating under the influence of high temperature. Connect the tester in the same way as for battery testing. Engage the load switch; this causes a current of 100 A to pass through the load. Attention! The switch should be held down for a maximum of 10 seconds.
Releasing the switch causes an immediate disconnection of the load. Holding the switch down longer can cause an excessive increase in the load temperature, which may lead to burns or even fire, and will also cause irreversible damage to the tester. After each test, you must wait 5 minutes before performing the next test, allowing the tester to cool down.
While the load is engaged, observe the pointer. If it is in the green zone, it means the battery is delivering full performance. For most 12 V batteries, the green zone on the scale is "stepped" depending on the cold cranking amperage (CCA) of the battery.
The cold cranking amperage (CCA) parameter is specified in the battery documentation.
If the pointer leaves the green zone but does not show a downward trend toward the beginning of the scale, it means the battery no longer delivers full performance. In this case, you should check the battery capacity using other methods, e.g., checking the electrolyte density using a hydrometer.
If the pointer drops towards the beginning of the scale, this may indicate the need to replace the battery with a new one.
Charging System Testing
CAUTION! Do not engage the load switch while the engine is running.
Connect the tester in the same way as for battery testing.
Start the engine and let it reach normal operating temperature.
Maintain engine speed in the range of 1200 - 1500 RPM.
Check the readings; if the pointer is in the green zone, the charging system is working properly.
A pointer in the red zone indicates improper operation of the battery charging system.
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.