Uninterruptible Power Supply BBG-1210/8 for CCTV 12V (18Ah)
Full Energy
2,633 ₴
1 / 2SKU GP33-10KL
Professional three-phase uninterruptible power supply RITAR GP33-10KL featuring double-conversion (Online) technology provides a high-reliability solution for safeguarding mission-critical equipment against all types of power grid anomalies. The unit converts a three-phase input current into a stable single-phase voltage with a pure sine wave. This makes it an optimal choice for ensuring the uninterrupted operation of IT infrastructure, server rooms, data centers, telecommunications nodes, industrial controllers, automation systems, and medical diagnostic equipment.
The primary advantage of Online technology is zero transfer time to battery power upon complete mains power failure. The three-phase input voltage can vary across a wide range while producing a strictly regulated output signal free of voltage spikes, sags, or frequency distortion. Using an external 384 Vdc battery system allows complete flexibility in selecting battery bank capacity tailored to specific runtime requirements.
Key Features:
- Double-conversion (Online) technology with zero transfer time to battery
- High power rating of 10 kVA / 8 kW for powering loads with a 0.8 power factor
- 3-phase input with wide allowable voltage range and auto-sensing frequency
- 1-phase output with pure sine wave and minimal harmonic distortion
- Operates with external 384 Vdc battery banks with flexible cell count configuration
- High efficiency up to 92% in inverter mode and up to 98% in energy-saving ECO mode
- Built-in 5-inch touchscreen LCD display for visual monitoring of key system parameters
- Comprehensive hardware and software protection against overloads, short circuits, overheating, and deep discharge
- Compatible with diesel and petrol generators
- Remote monitoring and management capabilities via integrated interfaces
Technical Specifications:
1. Electrical Parameters
• Input Voltage: 3x208/380/400/480 V ±25%
• Input Frequency: 50/60 Hz ±10%
• Input Wiring: 3 phases + neutral + ground
• Input Power Factor: ≥0.98
• Input THD: <5% at full load
• Inrush Current: <150% of rated value
• Output Voltage: 220 V ±1% (programmable)
• Output Frequency: 50/60 Hz ±0.1%
• Output Power: 10 kVA / 8 kW
• Output Waveform: Pure sine wave (THD <2% for linear load)
• Overload Capability: 125% up to 10 minutes, 150% up to 1 minute, 200% up to 30 seconds, 1000% up to 16 ms
• Efficiency: 92% in inverter mode, 98% in ECO mode
2. Battery System
• Supported Battery Type: External sealed lead-acid (VRLA)
• Nominal DC Voltage: 384 V
• Adjustable DC Voltage Range: 300–480 V
• Standard Cell Quantity: 32 pcs (optionally up to 52 pcs)
• Charging Current: 10–15% of battery capacity
• Recharge Time: 4–8 hours to 90% capacity
• Recommended Depth of Discharge: up to 50% (maximum up to 80%)
• Temperature Compensation: ±3 mV/°C/cell
• Battery Connection Type: Rear panel terminals, recommended cable cross-section from 35 mm²
• Battery Pack Protection: DC circuit breaker on the UPS side
3. Transient Characteristics
• Transfer Time to Battery: 0 ms
• Inverter Transfer Time: <4 ms
• Permissible Voltage Sag: up to 100%
4. Protection Functions
• Hardware Protection: Input and output circuit breakers, DC fuses, 20 kA / 1.5 kV surge protection device (SPD), thermal protection at +55°C
• Software Protection: Deep discharge cut-off at 1.75 V/cell, phase imbalance monitoring >50%, reverse power protection
5. Interfaces and Control
• Display: 5" touchscreen LCD (monitors voltages, currents per phase, frequency, battery charge state, internal temperature)
• Communication Ports: RS232, RJ-45 for optional SNMP adapter, dry contact
• Supported Software: PowerShield for Windows and Linux operating systems
6. Physical Parameters and Environmental Conditions
• Dimensions (WxDxH): 830x802x1050 mm
• Unit Weight: 153 kg (excluding external batteries)
• Cooling System: Forced air, 2 fans with N+1 redundancy
• Noise Level: Less than 60 dB at 1 m distance
• Operating Temperature Range: 0°C to +40°C
• Storage Temperature: -20°C to +60°C
• Operating Humidity: 0–95% non-condensing
• Maximum Operating Altitude: up to 1700 m without derating
• Generator Requirements: Recommended rating from 15 kVA, allowable generator THD up to 15%
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.